September 22, 2007

  • Max Fun?  Not.

    'Just another reminder that some sailboats are better than others.  On February 2, 2007, one member of the crew died aboard this boat when its keel broke off.

    According to the boat autopsy, ". . . Unbeknown to the designer, the builder sub-contracted construction of the hollow keel to a steel fabricator who had no marine experience.  The fabricator changed the design of the keel to ease manufacture and to reduce costs but without adequately assessing the stresses to which the keel would be subjected in service. . . ."

    There were a number of things that went wrong with that sailing trip -- another reminder to have all safety gear present and functioning in the case of such as thing as your keel falling off in strong winds.

    The report also says that the Max Fun 35 has been redesigned, to correct the structural flaws.  So, now, I'll bet they're just as reliable as Firestone tires, after the blow-out fiascos.

  • Navigation

    Having my maps arrive early was wonderful.  But understanding them is another thing entirely.  I asked Matt, "What do you think this star-like thing means?"  He had no clue.

    Lucky for me, someone has given me a point of reference (all puns intended).


    The American Practical Navigator
    by Nathaniel Bowditch

  • Deep Cycle Batteries

    I really need to know more about batteries and engines.  And this is a good opportunity.


    Starting, Marine, and
    Deep-Cycle Batteries

    • Starting (sometimes called SLI, for starting,
      lighting, ignition) batteries are commonly used to start and run
      engines. Engine starters need a very large starting current for a very
      short time. Starting batteries have a large number of thin plates for
      maximum surface area. The plates are composed of a Lead "sponge",
      similar in appearance to a very fine foam sponge. This gives a very
      large surface area, but if deep cycled, this sponge will quickly be
      consumed and fall to the bottom of the cells. Automotive batteries will
      generally fail after 30-150 deep cycles if deep cycled, while they may
      last for thousands of cycles in normal starting use (2-5% discharge).
    • Deep cycle batteries are designed to be discharged
      down as much as 80% time after time, and have much thicker plates. The
      major difference between a true deep cycle battery and others is that
      the plates are SOLID Lead plates - not sponge. Unfortunately, it is
      often impossible to tell what you are really buying in some of the
      discount stores or places that specialize in automotive batteries. The
      popular golf cart battery is generally a "semi" deep cycle - better than
      any starting battery, better than most marine, but not as good as a true
      deep cycle solid Lead plate, such the L-16 or industrial type. However,
      because the golf cart (T-105, US-2200, GC-4 etc) batteries are so
      common, they are usually quite economical for small to medium systems.
    • Marine batteries are usually actually a "hybrid",
      and fall between the starting and deep-cycle batteries,though a few
      (Rolls-Surrette and Concorde, for example) are true deep cycle. In the
      hybrid, the plates may be composed of Lead sponge, but it is coarser and
      heavier than that used in starting batteries. It is often hard to tell
      what you are getting in a "marine" battery, but most are a hybrid.
      "Hybrid" types should not be discharged more than 50%. Starting
      batteries are usually rated at "CCA", or cold cranking amps, or "MCA",
      Marine cranking amps - the same as "CA". Any battery with the capacity
      shown in CA or MCA may not be a true deep-cycle battery. It is sometimes
      hard to tell, as the term deep cycle is
      sometimes overused. CA and MCA ratings are at 32 degrees F, while CCA is
      at zero degree F. Unfortunately, the only positive way to tell with some
      batteries is to buy one and cut it open - not much of an option.

    Excerpt from http://www.windsun.com/Batteries/Battery_FAQ.htm

September 8, 2007

  • Tides Online --
    NOAA

    Finding tidal information has been kind of
    difficult.  It's a whole 'nother language.


    Snapshot from http://tidesonline.nos.noaa.gov/geographic.html

    For
    example, I love this definition of
    MLLW:


    MLLW -- Mean
    Lower Low
    Water

    There are two low tides in each
    tidal cycle (so usually two low tides in
    each day). These two low tides are not quite the same height because
    one tide
    is generated by the gravitational interaction with the sun (which is
    small), and the other is generated by the gravitational interaction
    with the moon
    (which is not so small). Since the two low tides (or water levels) are
    different levels of low, one is naturally the higher low water (higher
    low
    tide) and the other is the lower low water (lower low tide).
    So Mean Lower Low Water is the average of the lower low water height of
    each tidal day (ie average of the lowest low tide from each day). The
    averages are taken over a period called the National Tidal Datum
    Epoch (a 19-year epoch).

    from http://sfports.wr.usgs.gov/SFPORTS/glossary.html


    I
    tried reading this paragraph out loud to Matt, and it's a tongue
    twister in the middle, there.

    Anyway, tidal
    information can be found at Tides
    Online
    , run by NOAA, or at the main site which is Tides and
    Currents
    .


    http://tidesonline.nos.noaa.gov/


    http://tidesandcurrents.noaa.gov/

  • Maps

    Yesterday, UPS *finally* delivered the nautical charts for the part of Region 1 that we will be sailing.  And I believe Miss Teen South Carolina would agree that this is a good thing.


    Miss Teen South Carolina 2007 speaks out about maps

  • A Workship!  Er. . . Workshop!

    We recently put a bid on a house here in Texas.  It's a bit more square footage than I would have liked, which just means more to vacuum.  And the yard is over an acre, which means "riding lawn mower."  It has too many skylights, which means "hail damage."  We'll have to maintain the well which waters the yard, and that will cost a whole $20 a month.  And yeah, interest rates aren't so hot, at 6.37%.

    But I don't care.  It's all worth it.  Because of this:


    Space.  A whole fricking covered area of space.

    This old RV parking lot is so big, I could fit my old house under it, and still have room to spare.  Lots of good ventilation, and dry, dry weather.  What more could a gal ask for?  Now it's time to find a good table saw. . . .

    If it isn't absolutely plain, I love Texas!

August 31, 2007

  • EPIRB

    In a discussion about piracy, someone brought up the subject of EPIRBs.  What is an EPIRB?  There are far too many acronyms in the world today, that I really don't need another one.  For example, when someone writes "BBB" in a chart, are they referring to "blood-brain barrier" or a "bundle branch block"?  There's a big difference!  Depending on context, "ASA" can refer to either acetylsalicylic acid or the American Sailing Association.

    An EPIRB is simply an emergency position-indicating radio beacon.  Nothing complicated there.


    http://en.wikipedia.org/wiki/Emergency_Position-Indicating_Radio_Beacon

August 30, 2007

  • Engine Maintenance

    One thing that always bugs me is how little I know about engines and electrical wiring.  And given that on old boats, these are probably the things that one has to deal with the most, it behooves me to find a good resource (aside from trial by fire) for such matters.

    A kind person recommended this text:


    Boatowner's Mechanical and Electrical Manual

    by Nigel Calder

August 26, 2007

  • All You Pretty Girls

    I have the opposite problem!  But the song doesn't say "pretty boys."  I guess becaused they all sailed *with* them!

August 22, 2007

  • Water-Ballast vs. Lead-Ballast

    I overheard a discussion today about water-ballast versus lead-ballast, and to be honest, I had no fudging clue what they were talking about, probably because I've never sailed a boat with a keel!  (Oh, wait. I did sail a ketch with a keel of *some* sort 3 years ago.)  Anyway, I found it an interesting topic, and I learned something about what I would prefer in the boat I plan to build.

    The following is an excerpt from a discussion about the water-ballast of a MacGregor 26.  It's from http://www.faqs.org/faqs/boats-faq/part1/


    3.3.1 Does water ballast work?

    Yes, but not nearly as well as a more dense ballast like lead. We are
    talking here about a fixed tank of water placed as low in the boat as
    possible and completely filled. An air bubble in the tank means that the
    some of the water is free to move to the low side and in this case stability
    can actually be worse than if the tank were left empty. If it is kept empty,
    the entire boat will float too high, reducing stability. So if your boat has a
    ballast tank, keep it *completely* filled while you are afloat. To answer
    the question in more detail, it needs to be broken down into two
    questions, one comparing water with lead ballast and another comparing
    water with no ballast.

    How does a water-ballasted boat compare with a lead-ballasted boat of the same length, beam, draft, freeboard and interior headroom, and the same weight of ballast?

    Water ballast is much lighter for trailering, as it can be drained. A water
    tank is cheaper than the same weight of solid lead. These benefits are
    purchased at a cost however.

    The water-ballasted boat will have less static stability, This is because the
    less dense ballast cannot be concentrated as low in the boat. The
    water-ballasted boat therefore cannot carry as much sail as the
    lead-ballasted boat, but will have similar resistance to motion. This
    means decreased speed. Also, this ballast occupying relatively high areas
    of the boat will require a deeper shaped hull for the same interior
    headroom which leads to a shorter (vertically) fin or centerboard for the
    same total draft. This adds up to worse windward performance. These
    are the costs of the more convenient trailering and lower expense.

    How does a water-ballasted boat compare with an unballasted boat of the same length, beam, draft, freeboard, and interior headroom?

    If designed to do so, water ballast could make a boat uncapsizable. At
    least, it will increase the capsize angle. Water ballast also adds mass and
    therefore easier motion in a sea and better way-carrying in a lull or a
    tack. It will do this for little increased expense and trailering weight.

    Basically, the advantages are bought at the cost of performance. A
    water-ballasted boat can carry little if any more sail than an unballasted
    boat. This is because it has little if any more stability at small angles of
    heel. However, for the same length, headroom, freeboard, etc. it must
    displace a greater amount of water equal to the tank of ballast. The same
    length, combined with greater displacement and no greater sail-carrying
    ability means less speed. Compared with an unballasted boat even more
    than compared with the lead-ballasted boat, the hull must be deeper,
    which again means less of the draft constraint can be allowed for the
    centerboard. This means poorer windward performance. Also the draft
    with centerboard up must be greater than the unballasted case. The
    better carrying of way and easier motion are at the cost of slower
    acceleration in puffs or after tacks. The increased mass is a double-edged
    sword.

    Why does it add little if any more stability at small angles of heel?

    Remember we are comparing a water-ballasted with an unballasted boat
    of the same length, freeboard, cabin headroom, etc. The increased weight
    of water must be put in an increased underwater volume of the hull
    located as low as possible. This added volume of water underneath what
    could have been the bottom of the unballasted boat has no net
    gravitational force under static conditions as long as it is completely
    submerged. That is, neglecting the additional weight of the tank and
    added hull material, the increased weight is exactly balanced by the
    buoyancy of the increased volume to hold it. It therefore can have no
    effect on either heeling or righting moment if the tank is full of water of
    the same density as that in which it is submerged. Another way to think
    of it is that the center of buoyancy is lowered by exactly the same amount
    as the center of gravity.

    Then how does it increase the capsize angle? At large angles of heel more
    or less of the water tank rises above the waterline. Now the relationship
    between the center of gravity and the inclined center of buoyancy becomes
    more favorable than the unballasted case. All of the weight of the water is
    no longer balanced by its buoyancy.

    3.3.2 Summary

    Could you make a SHORT summary of all this?

    Yes. Just consider a water-ballasted boat to be an unballasted boat but
    with improved capsize angle and all the plusses and minuses of added
    weight while afloat but not while trailering. There is a cost in
    performance. (gf)

    from http://www.faqs.org/faqs/boats-faq/part1/